iMax 500MAS Compact
The most advanced Tumbler microprocessor on the market.
Controls: time, temperature, pressure, vacuum, humidity, speed, direction, weight ...
The INDU WRC 200 controller was designed for software, step control of devices based on temporal cycles with regulation of temperature and vacuum.
It is intended for the automatic control of the tumbling process in vacuum tumblers
. 12-24V AC/DC (typically from modules power supply unit)
14 ½’’ LED displays
STANDARD SOFTWARE IMPLEMENTED:
The MCM-022 controller was designed for software, step control of devices based on pulsating cycles.
POWER SUPPLY: 24 VAC
POWER CONSUMPTION: 10 W
Mounting hole dimensions: 143x238 mm
Installation depth with connections: 47 mm
External dimensions of the frame with seal: 187x280mm
The primary application of the INDU-22 controller is controlling equipment according to a temporal algorithm by cyclic switching actuation devices on and off. One of the typical applications of the INDU22 controller is in a vacuum tumbler.
2 potential-free digital inputs:
Control inputs: contact to GND
Maximum resistance of closed contact 100 Ω
Minimum resistance of open contact 10,000 Ω
1 relay output contact switch (250 VAC/8A)
4 switching relay outputs (250 VAC/8A)MISCELLANEOUS:
Conditional process termination, programmed from SETUP.
RELAY CONTACT RATED LOAD
Recommended external protection - fuse: 6.3 A
Maximum total current (bus) -4A