Measurement recording systems
Air temperature and humidity are the parameters playing essential role in meat processing process. Their continuous monitoring, as well as possibility of preparing reports documenting these values at individual places of process line,are forced by HACCP systems implemented in the plants.
Which solution to choose? What should be particularly considered when selecting measuring system?
First of all recording system has to ensure accuracy and frequency of records determined by regulations. Individual elements of the system must ensure monitoring in all points of cooling chain, both in rooms and in refrigerated trucks. Ease of implementation and further operation of the system should be taken into account when selecting a solution.
MIKSTER has been linked to meat processing trade since many years. All offered products are developed in close cooperation with production plants, in order for them to fulfil the most stringent requirements of their users.
It is the same with LOGGINET recording system.
The solution, being under continuous development, can be daringly depicted as the most extensive and advanced one present on the market. What is the feature distinguishing the LOGGINET? All LOGGINET sensors ensure measurement accuracy required by regulations, confirmed with adequate certificates.
All LOGGINET system components are intended for fixed assembly (rooms, cars). The sensors cannot be moved, put away, or lost. When offering the LOGGINET system, MIKSTER completes all elements necessary for installation and proper start up of the system (sensors, recording central units, brackets, cables and electrical equipment, software). The system can be installed and started by MIKSTER Service expert team on customer request.
The LOGGINET series consists of 3 families: : LOGGINET RADIO, LOGGINET STANDARD and LOGGINET CLIPS, with transport temperature recorder LOGGICAR, that joined the group recently.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOGGINET-RADIO monitoring network is a great breakthrough in monitoring systems. This system finds application as a monitoring network system in places of food storage, where it is the necessity of temperature and humidity monitoring.Application of radio transmission as an information carrier of measured and stored parameters has permitted to eliminate expensive wiring system. LOGGINET-RADIO system can be applied in existing and working systems (e.g. supermarkets with cooling counter, coolers) thanks to lack of wires.
The compatibility of LOGGINET and LOGGINET-RADIO systems enables to connect cable and radio systems having created the system resistant to local data transmission conditions.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOGINET STANDARD is an industrial microprocessor system designed for monitoring network (especially temperature and humidity).
Diffused system structure enables to assemble and to make any configuration so that satisfies the user and the designer of monitoring network. This software allows to generate reports according to HACCP system requirements.
Applied Modbus RTU (RS-485) transmission protocol facilitates the communication of LOGGINET system with other computer and microprocessor systems.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOGGINET CLIP - industrial temperature and humidity monitoring network designed especially for application in places where high resistance of measurement elements to difficult environmental conditions is required.
Continuous monitoring and logging of measured parameters is guaranteed. Furthermore in alarming situations SMS announcements and information via Internet have been sent.
System LOGGINET-CLIPS completes LOGGINET system with cable measurement network which is marked by low assembling costs and simplicity of installation. 237 temperature and humidity measurement locations may be monitored and logged.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Transport Temperature Recorder Loggicar is intended for monitoring a temperature in cold storage trucks. Four temperature sensors (e.g. cold store, inlet and outlet of an evaporator, product temperature) and 4 bi-state signals (opening of side and rear doors, defrosting, aggregate operation) can be connected to the Recorder. The devise assures total control over the cold storage truck.
The report printer is built-in. Due to this feature the printing of a temperature report for the cargo recipient or for the veterinary service checking the correctness of transport conditions during the road traffic control (countries of the “Old European Union”) can be done fast. The only exploitation cost of the Recorder is paper for a printer.
The radio modem offered by MIKSTER ensures the transmission of reports from LGDL MS to the computer with the LOGGISOFT program installed.
Air temperature and humidity are the parameters playing essential role in meat processing process. Their continuous monitoring, as well as possibility of preparing reports documenting these values at individual places of process line,are forced by HACCP systems implemented in the plants.
Which solution to choose? What should be particularly considered when selecting measuring system?
First of all recording system has to ensure accuracy and frequency of records determined by regulations. Individual elements of the system must ensure monitoring in all points of cooling chain, both in rooms and in refrigerated trucks. Ease of implementation and further operation of the system should be taken into account when selecting a solution.
MIKSTER has been linked to meat processing trade since many years. All offered products are developed in close cooperation with production plants, in order for them to fulfil the most stringent requirements of their users.
It is the same with LOGGINET recording system.
The solution, being under continuous development, can be daringly depicted as the most extensive and advanced one present on the market. What is the feature distinguishing the LOGGINET? All LOGGINET sensors ensure measurement accuracy required by regulations, confirmed with adequate certificates.
All LOGGINET system components are intended for fixed assembly (rooms, cars). The sensors cannot be moved, put away, or lost. When offering the LOGGINET system, MIKSTER completes all elements necessary for installation and proper start up of the system (sensors, recording central units, brackets, cables and electrical equipment, software). The system can be installed and started by MIKSTER Service expert team on customer request.
The LOGGINET series consists of 3 families: : LOGGINET RADIO, LOGGINET STANDARD and LOGGINET CLIPS, with transport temperature recorder LOGGICAR, that joined the group recently.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOGGINET-RADIO monitoring network is a great breakthrough in monitoring systems. This system finds application as a monitoring network system in places of food storage, where it is the necessity of temperature and humidity monitoring.Application of radio transmission as an information carrier of measured and stored parameters has permitted to eliminate expensive wiring system. LOGGINET-RADIO system can be applied in existing and working systems (e.g. supermarkets with cooling counter, coolers) thanks to lack of wires.
The compatibility of LOGGINET and LOGGINET-RADIO systems enables to connect cable and radio systems having created the system resistant to local data transmission conditions.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOGINET STANDARD is an industrial microprocessor system designed for monitoring network (especially temperature and humidity).
Diffused system structure enables to assemble and to make any configuration so that satisfies the user and the designer of monitoring network. This software allows to generate reports according to HACCP system requirements.
Applied Modbus RTU (RS-485) transmission protocol facilitates the communication of LOGGINET system with other computer and microprocessor systems.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
LOGGINET CLIP - industrial temperature and humidity monitoring network designed especially for application in places where high resistance of measurement elements to difficult environmental conditions is required.
Continuous monitoring and logging of measured parameters is guaranteed. Furthermore in alarming situations SMS announcements and information via Internet have been sent.
System LOGGINET-CLIPS completes LOGGINET system with cable measurement network which is marked by low assembling costs and simplicity of installation. 237 temperature and humidity measurement locations may be monitored and logged.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Transport Temperature Recorder Loggicar is intended for monitoring a temperature in cold storage trucks. Four temperature sensors (e.g. cold store, inlet and outlet of an evaporator, product temperature) and 4 bi-state signals (opening of side and rear doors, defrosting, aggregate operation) can be connected to the Recorder. The devise assures total control over the cold storage truck.
The report printer is built-in. Due to this feature the printing of a temperature report for the cargo recipient or for the veterinary service checking the correctness of transport conditions during the road traffic control (countries of the “Old European Union”) can be done fast. The only exploitation cost of the Recorder is paper for a printer.
The radio modem offered by MIKSTER ensures the transmission of reports from LGDL MS to the computer with the LOGGISOFT program installed.
|
LOGGINET-RADIO |
|
|
The WSTD-800-01-DS is designed to measure indoor and outdoor temperature and to transmit the data to the RADIO receiver.
It is able to monitor continuously in 1 minute intervals for 136 hours. The sensor is powered by 3.6 Volt lithium battery. Outside dimensions: 82x80x57mm Sample readings are processed by the Loggisoft PC monitoring program. |
|
The WSTHD-800-01-DS is designed to measure indoor and outdoor temperature and humidity and to transmit the data to the RADIO receiver.
It is able to monitor continuously in 1 minute intervals for 136 hours. The sensor is powered by 3.6 Volt lithium battery. Outside dimensions: 82x80x57mm Sample readings are processed by the Loggisoft PC monitoring program. |
|
Radio receiver WSRT-800-01 collects the data from the radio sensors and transmits to a PC.
The sample are processed by the Loggisoft PC monitoring program. To extend the reach of the receiver it is possible to install repeaters in the monitoring system. |
|
LOGINET STANDARD |
|
The LGTD-02 sensor is designed for measuring indoor and outdoor temperature.
The sensor’s enclosure is designed for wall mounting. The front part of the sensor enclosure contains LED diodes showing the device’s operation mode and a LED display with the current temperature reading. Optionally, the sensor is available with a measurement probe connected on a flexible cable. Communication with the sensor is implemented via RS-485. Up to 32 sensors can be connected to a single RS-485 line. |
|
The LGTHD-02 sensor is designed for measuring indoor temperature and humidity.
The sensor’s enclosure is designed for wall mounting. The front part of the sensor enclosure contains LED diodes showing the device’s operation mode and transmission status. Communication with the sensor is implemented via RS-485. Up to 32 sensors can be connected to a single RS-485 line. Sensor calibration is digital. Optionally, the sensor is available with a measurement probe connected on a flexible cable. The distinct feature of the product is a large and clear 7-segment LED display with current measurement values |
|
The LGDL-mini central recording unit is designed to retrieve and record data from the measurement sensors in the LOGGINET system. The integrated real time clock and large memory capacity make the system independent from a PC computer.
The unit is compatible with the LOGGISOFT computer software for data visualisation and archiving. Optionally, there is a possibility of adjusting the communication protocols to work with any devices. |
|
The LGPS power supply unit is a device matching the 110 VAC power supply to the requirements of the Logginet Standard equipment
|
|
LOGGINET CLIP |
|
LGT-02 CLIP temperature sensor
is intended for measuring temperature in processing rooms, coolers, freezers, ... There are LED diodes on the front of the sensor housing that indicate the device's operating mode and transmission status. Communication with the sensor takes place via the RS-485 interface. The sensor could have the temperature probe connected with a 2,5 m or 7 meter long flexible cable. LGT-02 CLIP k2.5; LGT-02 CLIP k7 |
|
LGTH-02 CLIP temperature sensor
is designed to measure temperature and humidity in rooms, coolers, freezers, .. Communication with the sensor takes place via RS-485. There are two LED diodes on the front housing of the sensor, indicating the transmission status. The sensor could have the temperature probe connected with a 2,5 m or 12 meter long flexible cable. LGTH-02 CLIP k2.5; LGTH-02 CLIP k12 |
| logginet_clip.pdf |
|
|
Canada 1 888 343 5421
USA 1 303 823 5839
|